Roland 24 bit Digital Studio Workstation VS-890 Manuel d'utilisateur télécharger pdf (Page 83)

Using Effects

Press [FADER (EDIT)] several times to let the FADER

indicator light orange. (Input Mixer)

Raise and lower channel fader 1, and verify that the volume

changes. The input channel fader is used to make fine

adjustments to the recording level. In order to record with

optimal audio quality, the fader should normally be set in the

0 dB position.

Select the source that will be recorded on the track. Hold down

the [STATUS] button of the track that you wish to record, and

press the [SELECT (CH EDIT)] button of the input channel

that you wish to assign as the source. For this example, hold

down the [STATUS] button of track 3, and press the input

channel 1 [SELECT (CH EDIT)] button so it begins to blink.

At this time, the sound of

input channel 1 will no

longer be output directly

from master out.

Press [FADER (EDIT)] several times to let the FADER

indicator light green. (Track Mixer)

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 147 148

Pas de commentaire

Roland 24 bit Digital Studio Workstation VS-890 Manuel d'utilisateur Page 83