®ÂØÒňΠXP-50 Supplemental Notes
© 1997 Roland Corporation U.S. XP-50 Frequently Asked Questions Page 3 of 8
Load
ing and Playing a Song Chain (continued)
3) Press DISK/UTILITY.
4) CURSOR to 2: LOAD.
5) Press ENTER.
6) CURSOR to 1: CHAIN.
7) Press ENTER.
8) Use the VALUE DIAL to select a Song Chain from the disk.
9) Press ENTER. The Song Chain will be loaded.
10) Press PLAY. The Song Chain will playback in its entirety.
II. Performance
Using an External Controller with the XP-50
When REMOTE is on, the XP-50 will allow an external keyboard to act like the XP-50’s keyboard. The currently
selected Part (in Performance Mode) or Patch (in Patch Mode) will be triggered regardless of the controller's MIDI
transmit channel. This is useful when using an external keyboard (such as the AX-1 Remote MIDI Keyboard
Controller or the A-90 Expandable Controller) to play the XP-50 or program the internal sequencer:
1) Press SYSTEM.
2) Press 4/12 (MIDI).
3) CURSOR UP to Perform MIDI (Patch MIDI in Patch Mode) if necessary.
4) CURSOR to Remote and use the VALUE DIAL to select “ON.”
NOTE: If you are using an external sequencer or need to access sounds on different MIDI channels,
REMOTE must be turned off.
Splitting the Keyboard in Performance Mode
You can set up a split on the XP-50 so two (or more) sounds can be played from different sections of the
keyboard. Use the following procedure to create a split Performance:
1) Press PERFORM.
2) Press EDIT so it is lit.
3) Press 1/9 (COMMON).
4) CURSOR DOWN to Key Mode and use the VALUE DIAL to select “LAYER.”
5) Press PALETTE so it is lit.
6) CURSOR DOWN to KEY RANGE LOWER.
7) Use the CURSOR buttons to select the desired Part and the VALUE DIAL to adjust that Part’s lower key
range.
8) CURSOR DOWN to KEY RANGE UPPER.
9) Use the CURSOR buttons to select the desired Part and the VALUE DIAL to adjust that Part’s upper key
range.
10) Press EDIT so it is not lit.
11) Press the TX and RX buttons simultaneously so they are both lit.
12) Press the desired PART 1-8 (9-16) buttons (under the display) to select the Parts to use in the split.
Here is an example: Part Key Range Lower Key Range Upper
Part 1 (a piano patch) C4 G9
Part 2 (a bass patch) C1 B3
This example uses a bass sound on the lower half of the keyboard and a piano on the upper half.
Creating a Layered Performance.
With the XP-50, you can create a Layered Performance that will have two or more sounds playing simultaneously.
Examples of Layered Performances are User #01: “Tekno Loop 1” and User #02: “Opening Orch.” Use the
following procedure to create a Layered Performance:
1) Press PERFORM.
2) Press EDIT so it is lit.
3) Press 1/9 (COMMON).
(6 pages)
(254 pages)
(64 pages)
(65 pages)
(84 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels