Roland F-120R Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Amplificateur pour instrument de musique Roland F-120R. Roland F-120R User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
MIDI Implementation
Model: F-120R, RP301R
Date: Jun. 28, 2012
Version: 1.00
1. Receive Data
Channel Voice Messages
Note o
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number: 0H-FH (ch.1-ch.16)
kk = note number: 00H-7FH (0-127)
vv = note o velocity: 00H-7FH (0-127)
Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
kk = note number: 00H-7FH (0-127)
vv = note on velocity: 01H-7FH (1-127)
* Not received when Rx. NOTE MESSAGE = OFF. (Initial value is ON)
Polyphonic Key Pressure
Status 2nd byte 3rd byte
AnH kkH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
kk = note number: 00H-7FH (0-127)
vv = key pressure: 00H-7FH (0-127)
* Not received when Rx. POLY PRESSURE (PAf ) = OFF. (Initial value is ON)
* The resulting e ect is determined by System Exclusive messages. With the initial
settings, there will be no e ect.
Control Change
* When Rx. CONTROL CHANGE = OFF, all control change messages except for
Channel Mode messages will be ignored.
* The value speci ed by a Control Change message will not be reset even by a
Program Change, etc.
Bank Select (Controller Number 0, 32)
Status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
mm, ll = Bank number: 00H, 00H-7FH, 7FH (bank.1-bank.16384),
Initial Value = 00 00H (bank.1)
* Not received when Rx. BANK SELECT = OFF.
* “Rx. BANK SELECT” is set to OFF by “GM1 System On, and Bank Select message will
be ignored.
* “Rx. BANK SELECT” is set to ON by “GM2 System On.
* “Rx. BANK SELECT” is set to ON by power-on Reset or by receiving “GS RESET.
* When Rx. BANK SELECT LSB = OFF, Bank number LSB (llH) will be handled as 00H
regardless of the received value. However, when sending Bank Select messages,
you have to send both the MSB (mmH) and LSB (llH, the value should be 00H)
together.
* Bank Select processing will be suspended until a Program Change message is
received.
* The GS format Variation number” is the value of the Bank Select MSB (Controller
number 0) expressed in decimal.
* Some other GS devices do not recognize the Bank Select LSB (Controller number
32).
Modulation (Controller Number 1)
Status 2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Modulation depth: 00H-7FH (0-127)
* Not received when Rx. MODULATION = OFF. (Initial value is ON)
* The resulting e ect is determined by System Exclusive messages. With the initial
settings, this is Pitch Modulation Depth.
Portamento Time (Controller Number 5)
Status 2nd byte 3rd byte
BnH 05H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Portamento Time: 00H-7FH (0-127), Initial value = 00H (0)
* This adjusts the rate of pitch change when Portamento is ON or when using the
Portamento Control. A value of 0 results in the fastest change.
Data Entry (Controller Number 6, 38)
Status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
mm, ll = the value of the parameter speci ed by RPN/NRPN
mm = MSB, ll = LSB
Volume (Controller Number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Volume: 00H-7FH (0-127), Initial Value = 64H (100)
* Volume messages are used to adjust the volume balance of each Part.
* Not received when Rx. VOLUME = OFF. (Initial value is ON)
Pan (Controller Number 10)
Status 2nd byte 3rd byte
BnH 0AH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = pan: 00H-40H-7FH (Left-Center-Right),
Initial Value = 40H (Center)
* Some Tones are not capable of being panned all the way to the left or right.
* Not received when Rx. PANPOT = OFF. (Initial value is ON)
Expression (Controller Number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Expression: 00H-7FH (0-127), Initial Value = 7FH (127)
* This adjusts the volume of a Part. It can be used independently from Volume
messages. Expression messages are used for musical expression within a
performance; e.g., expression pedal movements, crescendo and decrescendo.
* Not received when Rx. EXPRESSION = OFF. (Initial value is ON)
Copyright © 2012 ROLAND EUROPE
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND EUROPE.
1PS
Vue de la page 0
1 2 3 4 5 6 ... 35 36

Résumé du contenu

Page 1 - MIDI Implementation

1MIDI ImplementationModel: F-120R, RP301RDate: Jun. 28, 2012Version: 1.001. Receive Data Channel Voice Messages ●Note o Status 2nd byte 3rd byte8

Page 2

MIDI Implementation103. Parameter Address Map (Model ID = 42H)This map indicates address, size, Data (range), Parameter, Description, and Default Valu

Page 3

MIDI Implementation11 02: Room 3 03: Hall 1 04: Hall 2 05: Plate 06: Delay 07: Panning Delay40 01 31 00 00 01 00-07 REVERB

Page 4 - ■ Channel Mode Messages

MIDI Implementation12 ●Part ParametersThis instrument has 16 parts. Parameters that can be set individually for each Part are called Part parameters.I

Page 5 - ■ System Exclusive Message

MIDI Implementation1340 1x 24 00 00 01 00-01 Rx. BANK SELECT LSB OFF/ON 00 OFF* This instrument can be recognized Bank Select LSB (40H-43H) eve

Page 6

MIDI Implementation1440 2x 28 00 00 01 00-7F CAf LFO2 PITCH DEPTH 0-600 [cent] 00 0 [cent]40 2x 29 00 00 01 00-7F CAf LFO2 TVF DEPTH 0-2400

Page 7

MIDI Implementation154. Supplementary Material ●Decimal and Hexadecimal TableIn MIDI documentation, data values and addresses/sizes of exclusive messa

Page 8 - 2. Transmit Data

MIDI Implementation16 ●Example of an Exclusive Message and Calculating a ChecksumRoland Exclusive messages are transmitted with a checksum at the end

Page 9 - ■ System Exclusive Messages

MIDI Implementation175. E ect List0100: Equalizer0101: Spectrum0102: Enhancer0104: Isolator0105: Low Boost0106: High Pass Filter0110: Overdrive0111:

Page 10 - ■ Individual Parameters

MIDI Implementation18 ●0102: EnhancerControls the overtone structure of the high frequencies, adding sparkle and tightness to the sound.No Parameter V

Page 11

MIDI Implementation19 ●0110: OverdriveCreates a soft distortion similar to that produced by vacuum tube ampli ers.No Parameter Value Description1 Dri

Page 12

MIDI Implementation2 ❍ Hold 1 (Controller Number 64)Status 2nd byte 3rd byteBnH 40H vvHn = MIDI channel number: 0H-FH (ch.1-ch.16)vv = Control valu

Page 13

MIDI Implementation20 ●0114: Guitar Amp SimulatorThis is an e ect that simulates the sound of a guitar ampli er.No Parameter Value Description1 Pre

Page 14

MIDI Implementation21 ●0129: Multi Stage PhaserExtremely high settings of the phase di erence produce a deep phaser e ect.No Parameter Value Descrip

Page 15 - 4. Supplementary Material

MIDI Implementation22 ●0128: 2Band FlangerA  anger that lets you apply an e ect independently to the low-frequency and high-frequency ranges.No Para

Page 16

MIDI Implementation23 ●012b: Ring ModulatorThis is an e ect that applies amplitude modulation (AM) to the input signal, producing bell-like sounds. Y

Page 17 - 5. E ect List

MIDI Implementation24 ●0131: LimiterCompresses signals that exceed a speci ed volume level, preventing distortion from occurring.No Parameter Value D

Page 18

MIDI Implementation25 ●0143: Space DThis is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but p

Page 19

MIDI Implementation26 ●0122: RotaryThe Rotary e ect simulates the sound of the rotary speakers often used with the electric organs of the past. Since

Page 20

MIDI Implementation27 ●015b: Stereo Delay1This is a stereo delay.No Parameter Value Description1Delay Left Mode0–1 ms, noteWhen this is set to “note,”

Page 21

MIDI Implementation28 ●015e: Stereo Delay4This is a stereo delay.No Parameter Value Description1Delay Left Mode0–1 ms, noteWhen this is set to “note,”

Page 22

MIDI Implementation29 ●0151: Modulation DelayAdds modulation to the delayed sound.No Parameter Value Description1Delay Left Mode0–1 ms, noteWhen this

Page 23

MIDI Implementation3 ❍ Portamento Control (Controller Number 84)Status 2nd byte 3rd byteBnH 54H kkHn = MIDI channel number: 0H-FH (ch.1-ch.16)kk =

Page 24

MIDI Implementation30 ●0159: Tape EchoA virtual tape echo that produces a realistic tape delay sound. This simulates the tape echo section of a Roland

Page 25

MIDI Implementation31 ●0156: Gate ReverbThis is a special type of reverb in which the reverberant sound is cut o before its natural length.No Parame

Page 26

MIDI Implementation32 ●0206: Enhancer  ChorusThis e ect connects an enhancer and a chorus in series.No Parameter Value Description1Enhancer Sens0–12

Page 27

MIDI Implementation33 ●020a: Flanger  DelayThis e ect connects a  anger and a delay in series.No Parameter Value Description1Flanger Pre Delay0–125

Page 28

MIDI Implementation346. Tone List[Piano] buttonNo. NameUpper LayerMSB LSB PC MSB LSB PC1 G.Piano1 0 68 1 - - -2 G.Piano2 16 67 1 - - -3 G.Piano3 8 66

Page 29

35Function... Transmitted Recognized RemarksBasicChannelDefaultChanged11–161–161–16ModeDefaultMessagesAlteredMode 3X**************Mode 3Mode 3, 4 (M =

Page 30

36MIDI Implementation 11. Receive Data 1Channel Voice Messages 1Note o 1Note on 1Polyphonic Key Pressure 1Control Change 1Bank Select (Controll

Page 31

MIDI Implementation4 ❍ RPN MSB/LSB (Controller Number 100, 101)Status 2nd byte 3rd byteBnH 65H mmHBnH 64H llHn = MIDI channel number: 0H-FH (ch.1-c

Page 32

MIDI Implementation5 ●All Notes O (Controller Number 123)Status 2nd byte 3rd byteBnH 7BH 00Hn = MIDI channel number: 0H-FH (ch.1-ch.16)* When Al

Page 33

MIDI Implementation6 ❍ GM System O “GM System O ” is a command message that resets the internal state of this instrument from the GM state to its n

Page 34 - 6. Tone List

MIDI Implementation7 ❍ Chorus ParametersStatus Data byte Status F0H 7FH, 7FH, 04H, 05H, 01H, 01H, F7H 01H, 01H, 02H, ppH, vvHByte ExplanationF0H

Page 35 - MIDI Implementation Chart

MIDI Implementation8 ●Data TransmissionThis instrument can receive the various parameters using System Exclusive messages.The exclusive message of GS

Page 36 - Contents

MIDI Implementation9n = MIDI channel number: 0H-FH (ch.1-ch.16)pp = Program number: 00H-7FH (prog.1-prog.128) System Realtime Message ●Realtime Cl

Commentaires sur ces manuels

Pas de commentaire