Roland SJ-600 Manuel d'utilisateur télécharger pdf

***************************************************************************

Roland Firmware Updater Program

For SJ-600/500

***************************************************************************

Firmware means the control software to operate the machine written on the machine. Firmware Updater Program is the file to

rewrite the control software to the latest version.

This Firmware Updater Program is only for the models below. Do not use for other models.

SJ-600/500　 (Hereinafter referred to as printer)

Before operation, please read thorough this document and if you have some questions, please feel free to contact your nearest

authorized dealer.

Make sure to put all files into the same folder. The Updater does not work if the files are in the different folders.

The procedure is different depending on the printer and computer you use. Refer to the procedure matching your operating

environment.

---------------------------------------------------------------------------------------------------------------

-WindowsXP/2000/NT4.0/Me/98 must be installed.

-Using the computer in which the bundled Roland COLORCHOICE is installed and that can print out correctly is

recommended.

---------------------------------------------------------------------------------------------------------------

*The procedures are 2 different way depending on how to connect the computer. Make sure to follow the procedure matching

your environment.

-Connecting with Printer Cable

1. Double-click.

2. Click the Radio button next to Parallel.

1 2 3 4 5 6 7 8 9 10

9. Click [Next] 3
1. Double-click 5

Résumé du contenu

Page 1

***************************************************************************Roland Firmware Updater ProgramFor SJ-600/500*****************************

Page 2

---------------------------------------------------------------------------------------------------------------<Contact>Please feel free to cont

Page 3 - 9. Click [Next]

3. Select the port number connected the printer and click [Next]. 4. The dialog below appears and proceed to printer preparation.5. Turn the Main Powe

Page 4

6. Hold down the [UP], [LEFT] and [DOWN] arrow keys while pressing the sub power button to enter the Firmware Upgrade mode.7. The printer will display

Page 5 - 1. Double-click

10. Click [Yes] on the dialog below.11. Roland Firmware Updater Program starts to transfer the firmware. Once the printer is received the firmware, th

Page 6

-Connecting with Network Cable (Ethernet)1. Double-click .2. Click the Radio button next to Network (TCP/IP).3. Input IP address set to the printer an

Page 7

4. When the dialog below appears, proceed to printer preparation. 5. Turn the Main Power SW back of the printer on (Switch to [ | ] side.) .

Page 8

6. Hold down the [UP], [LEFT] and [DOWN] arrow keys while pressing the sub power button to enter the Firmware Upgrade mode.7. The printer will display

Page 9

10. Click [Yes] on the dialog below.11. Roland Firmware Updater Program starts to transfer the firmware. Once the printer is received the firmware, th

Page 10

<Trouble shooting>The dialog below is displayed and the Updater Program does not start.Cause:The Firmware Updater Program has already been start